Projects per year
Organisation profile
Introduction / mission
Integral design
The chair of Innovative Structural Design (ISD) focuses on the basic knowledge and understanding of structural principles, in combination with specific materials properties, in order to develop innovative and sustainable structural design solutions. One of the group’s key goals is the study of the integral structural design process and the relationship between architecture, structural design and other building-related disciplines.
Resource-efficient structural design
The building and construction industry are by far the most resource-intensive sector in the European Union. This sector, which is based on a very strong responsibility of architects as well structural engineers, consumes approximately 50% of all primary raw materials and is, therefore, substantially exhausting natural resources. In recent decades the construction industry focused mainly on the reduction of buildings’ energy consumption as well as use of renewable energy. However, the impact of material use will also be in the spotlight in the future.
Recently the Dutch government formulated the program ‘Nederland Circular in 2050’, which states the ambition to use 50% less primary materials in 2030 and to have a full circular economy in 2050. As one of the consequences as of 1st of January 2018 the Dutch municipalities will check compliance with a so-called MPG calculation (in Dutch: MilieuPrestatie Gebouwen; in English: Environmental Performance Buildings) for all new buildings. This mandatory material impact evaluates the total effect of the weighted environmental impacts of the total building’s materials. To meet these ambitions, resulting from the Paris Climate agreement, it is essential to re-think the use of materials in structural systems. Various approached can be followed. ISD focuses on the following three.
Highlighted phrase
Reduce – Reuse – Renew/Recycle
Organisational profile
1. Reduce use of materials:
The optimisation of structural systems in terms of minimal weight as well as more recent developments in the field of adaptive structures will create new opportunities to minimise the use of natural resources even further.
Lightweight Structures: Lightweight structures fully integrate engineering and architecture. When structures must span larger distances, or be higher, deployable or mobile, reducing their self-weight becomes increasingly important. To achieve this, lightweight structures avoid bending moments and are structurally designed to develop internal axial forces (tension and compression). Three-dimensional natural shapes make the flow of forces visible and enrich the architecture.
Adaptive Structural Systems: A variety of design aspects influence building performance. These include, apart from structural loadings, architectural criteria, environmental impact and user behaviour. Most, if not all, of these aspects change over time. However, conventional buildings are not designed to adapt to contextual aspects and needs. Therefore, research focuses on instant adaptation of structures and building envelopes to facilitate adaptation to context and needs.
2. Re-use of materials, elements and structures:
In all industrial countries there is a huge amount of existing building stock. Even if there will be further need for new buildings, a good understanding of the potential to re-use existing buildings can also contribute to save natural resources.
Life Cycle Design of Structures: To achieve the high European and Dutch sustainability goals, existing and future building stock energy performance levels will need to improve drastically. Furthermore, to reduce CO2 impact, it is necessary to systematically evaluate buildings’ capacity for change and upgrade them. This requires an assessment methodology to implement an improved Service Life. This methodology must incorporate statistical survival analysis methods as well as rating methodologies for technical flexibility indicator.
3. Renewable materials:
Another possibility is to replace traditional (mainly cement-based) materials with renewable bio-based materials, or even use completely ephemeral materials, such as ice, for temporary buildings.
Bio-based materials: Obviously natural, bio-based materials such as timber and bamboo have been used throughout these times, but nowadays other materials, which are not necessarily new themselves, but their application for building products are new, came up. Examples are hemp and flex fibres, Mycelium or lignin-based fibres for composite materials. In addition to fibre a resin is required to create composite materials and structures and various bio-based sources exist, such as linseed oil, furans or cashew nut shells, although the commercial development of these materials is not very far yet.
Structural ice: Furthermore, water, respectively ice, are being studied as a possible construction material. In certain areas, supply is practically endless, although its application for buildings is obviously limited to regions with very specific climate conditions. By reinforcing ice, it becomes stronger but also more ductile. A new application based on the unique deformation properties of reinforced ice is the use of flexible mouldings of ice.
Fingerprint
Collaborations and top research areas from the last five years
Profiles
-
Hossein Abdollahiparsa
- Built Environment, Innovative Structural Design - Postgraduate Design Engineer
Person: TOIO : PDEng-trainee
-
Rijk Blok
- Built Environment, Innovative Structural Design - Assistant Professor
Person: UD : Assistant Professor
-
Gülay Elbasdi, MSc
- Built Environment, Innovative Structural Design - Postgraduate Design Engineer
Person: TOIO : PDEng-trainee
-
SCB: Smart Circular Bridge for pedestrians and cyclists in a circular built environment NWE993
Blok, R., Teuffel, P. M., Moonen, S. P. G. (., Blok, R., Manconi, M., Shahmirzaloo, A., Habraken, A. P. H. W., Pronk, A. D. C., van den Hurk, B. & van Dorst, K.
26/09/19 → 31/12/23
Project: Research direct
-
Living lab: structural health in Biobased constructions
Blok, R., Moonen, S. P. G. (., Habraken, A. P. H. W., Teuffel, P. M., Tzimoulidis, E., Looymans, A., Abdollahiparsa, H. & Hannurkar, S.
13/03/19 → 31/12/22
Project: Research direct
-
Eindhoven University of Technology (TU/e) to participate in Interreg NWE PowerVIBES project
Moonen, S. P. G. (., Moonen, S. P. G. (., Sanders, M., Pujadas-Gispert, E., van Schie, F., van den Oever, J., Blok, R., Elbasdi, G., van Schie, F. & Moonen, I.
20/09/17 → 30/09/21
Project: Research direct
-
A path to more versatile code provisions for slab deflection control
Sanabra-Loewe, M., Capellà-Llovera, J., Ramirez-Anaya, S. & Pujadas, E., 15 Jan 2021, (E-pub ahead of print) In: Proceedings of the Institution of Civil Engineers - Structures and Buildings. XX, XXResearch output: Contribution to journal › Article › Academic › peer-review
-
Environmental and Economic Optimization of a Conventional Concrete Building Foundation: Selecting the Best of 28 Alternatives by Applying the Pareto Front
Pujadas, E., Vogtländer, J. G. & Moonen, S. P. G., 1 Feb 2021, In: Sustainability. 13, 3, 19 p., 1496.Research output: Contribution to journal › Article › Academic › peer-review
Open AccessFile3 Downloads (Pure) -
The Gem Tower: A Hybrid Renewable Energy Unit for Festivals
Pujadas, E., Lenaers, W. J. H. P., van Schie, F., Lazauskas, M. & Moonen, S. P. G., 8 Jan 2021, (E-pub ahead of print) In: Structural Engineering International. XX, XX, p. 1-6 6 p.Research output: Contribution to journal › Article › Academic › peer-review
Open AccessFile1 Citation (Scopus)7 Downloads (Pure)
Prizes
-
1st prize International Design Competition for a Center for Contemporary Art
Gerald Lindner (Recipient), 24 Apr 2010
Prize: Other › Discipline related › Professional
-
4TU Lighthouse project, Terra Ink
Pronk, Arno D.C. (Recipient), Turrin, M. (Recipient) & Venturini, T. (Recipient), 5 Jan 2017
Prize: Other › Fellowships & memberships › Scientific
File -
55th TU/e Anniversary Award, theme Energy
Khayrullina, Adelya A. (Recipient), 2011
Prize: TU/e › Other › Scientific
Activities
-
Applied Sciences (Journal)
Ester Pujadas-Gispert (Editorial board member)
12 Apr 2021Activity: Publication peer-review and editorial work types › Publication peer-review › Scientific
-
Verein zur Förderung des Leichtbaus (External organisation)
Patrick M. Teuffel (Chair)
11 Dec 2020Activity: Membership types › Membership of jury › Scientific
-
Circular Structural Design
Patrick M. Teuffel (Speaker)
10 Dec 2020Activity: Talk or presentation types › Keynote talk › Scientific
Press/Media
-
Eindhoven University of Technology: Prefab Concrete From Paviljoen Building Reused
29/05/21
1 item of Media coverage
Press/Media: Expert Comment
-
het maken van igloo's in Nederland
8/02/21
1 Media contribution
Press/Media: Public Engagement Activities
-
Structural engineers can make a big difference in terms of sustainability
30/09/20
1 Media contribution
Press/Media: Expert Comment
Student theses
-
Active adaptive concrete structures
Author: Deetman, A., 31 Oct 2017Supervisor: Salet, T. (Supervisor 1), Habraken, A. (Supervisor 2) & Wolfs, R. (Supervisor 1)
Student thesis: Master
File -
Active adaptive improvement of concrete structures
Author: Ploegmakers, M. N., 24 Nov 2020Supervisor: Habraken, A. P. (Supervisor 1) & Wijte, S. N. (Supervisor 2)
Student thesis: Master
File -
Analysis Pavilion Vogelensangh
Author: Abdullaa, F., 30 Apr 2019Supervisor: Voorthuis, J. (Supervisor 1), Schevers, J. (Supervisor 2) & Moonen, F. (Supervisor 2)
Student thesis: Master
File